
November is Carbon Monoxide Awareness Month, and ACHR News has a piece, ACHR News carbon monoxide safety coverage, that looks past the furnace. Its summary puts the contractor's role plainly: "Contractors can help uncover hidden risks." That phrase is a useful lens for a homeowner, because a furnace visit can be thorough and still leave other combustion sources unexamined.
Read the Invoice for What Was Not Tested
A line that says "combustion okay" or "CO normal" records one result from one appliance at one moment. It does not say what else was looked at. Before the crew packs up, ask for a written list of every fuel-burning appliance they checked and every one they skipped. In most homes that list should cover the furnace, the water heater, the gas range, a gas clothes dryer, any fireplace or wood stove, and any appliance in an attached garage. A blank line for something you own is a question to ask, not a silence to accept.
Ask for the Numbers and the Instrument
Readings only help with context. Ask which instrument was used, when it was last calibrated according to its manufacturer, and what the flue gas reading was at each appliance. Ask whether draft was measured. A vent that is not drawing properly can push exhaust into the house even when the burner looks fine. If the tech wrote a number, ask what it was compared against. A reading with no reference point is just a number on a page.
Check the Spaces Between the Appliances
Combustion trouble often starts in the building, not the appliance. An attached garage with a door that does not seal, a bathroom fan pulling hard, or a dryer running while the house is closed up can change pressure enough to pull exhaust back toward living space. Walk the house with the report in hand. Look at the water heater flue for separation or rust at the joints. Confirm the fireplace damper opens and closes fully. Make sure nothing with a gasoline or gas engine runs in the garage or near an air intake. Note each gap you find and add it to the report.
Treat the Alarm as the Last Check
Alarms still matter, and they need regular testing and a replacement date you can find. But an alarm reacts after carbon monoxide has already built up. The inspection is the earlier check, and the written inventory is how you keep track of that work between visits. Test the alarms on schedule, but do not treat a sounding alarm as a diagnosis. If an alarm sounds and nobody can explain why, leave the building, get everyone outside, and call the fire department or emergency number from there.
Decide Who Covers the Gap
If the contractor says an appliance is outside the visit, ask who is responsible for checking it and what that check costs. If you are weighing coverage for home systems and appliances, read whether it includes combustion-related inspections or only pays for parts after something fails. A plan that pays for repairs but never looks at a flue answers a different question than the one November raises.
Keep the list. The next visit should start from the written inventory, not from memory, so the untested items stay on the table until someone checks them.